How to eliminate the noise of the injection molding machine?

With the development of the plastics industry, the use of injection molding machines is increasing day by day, however, the noise problem of injection molding machines has always plagued producers and users. So how to eliminate the noise of the injection molding machine?

1. When the injection molding machine makes abnormal noise, but the bearing of the machine is damaged, it is necessary to check the use of the bearing and replace it if necessary, so as not to affect the normal use of the injection molding machine.

2. When the motor wiring is wrong, the system pressure of the injection molding machine rises, and the noise becomes louder. The solution is to re-reference the wiring diagram for wiring.

3. The oil level of the machine is too low, which will cause the oil filter or joint connection to inhale air into the oil, and also produce abnormal noise.

4. If the damping hole on the main valve core of the relief valve is blocked by oil dirt, noise will also occur. If such a situation occurs, it should be cleaned up in time to avoid damage to the machine.