Industry News- Ningbo beilun highsun machinery Co., ltd

12 Dec

Injection molding machine slow first and then fast injection method

Slow first and then fast injection, that is, first-stage slow injection, when it reaches a set position, second-stage fast injection, the starting point is usually set at the beginning of injection in...
Read more
04 Dec

What are the good operating habits of injection molding machines?

1. Before starting up: (1) Check whether there is water or oil in the electrical control box. If the electrical appliance is damp, do not turn it on. Maintenance personnel should blow-dry the electric...
Read more
27 Nov

Explanation of the solution to the problem of injection molding machine clamping part (1)

Explanation of the solution to the problem of injection molding machine clamping part 1. No clamping Approach: Check the travel switch in front of the safety door and repair it. Check the 24V5A power ...
Read more
19 Nov

Why does the temperature of the injection molding machine exceed the set temperature?

After the temperature of the injection molding machine is set, it will always exceed the set temperature after a period of time. 1) After reaching the set temperature, the relay is disconnected, and ...
Read more
14 Nov

What are the advantages of the "positioned injection" method?

1. "Position injection" method because the pressure and speed of the latter stage are cancelled, and two influencing factors are missing. Therefore, only the pressure and speed of the previous stage n...
Read more
03 Nov

Explanation of the reason for the screw of the injection molding machine to slip

People use high-speed injection molding machines to shorten the injection cycle and improve production efficiency. However, in the production process of injection molded products, the slip of the scre...
Read more

Web Menu

Product Search

Language

Exit Menu

Injection molding machine slow first and then fast injection method

What are the good operating habits of injection molding machines?

Explanation of the solution to the problem of injection molding machine clamping part (1)

Why does the temperature of the injection molding machine exceed the set temperature?

What are the advantages of the "positioned injection" method?

Explanation of the reason for the screw of the injection molding machine to slip

News categories

Product categories

Recent News

PRODUCT

LEAVE MESSAGE

CONTACT INFO

Submit feedback

Web Menu

Product Search

Language

Share

Exit Menu

Injection molding machine slow first and then fast injection method

What are the good operating habits of injection molding machines?

Explanation of the solution to the problem of injection molding machine clamping part (1)

Why does the temperature of the injection molding machine exceed the set temperature?

What are the advantages of the "positioned injection" method?

Explanation of the reason for the screw of the injection molding machine to slip

News categories

Product categories

Recent News

PRODUCT

LEAVE MESSAGE

CONTACT INFO

Submit feedback