1. Before starting up: (1) Check whether there is water or oil in the electrical control box. If the electrical appliance is damp, do not turn it on. Maintenance personnel should blow-dry the electrical parts before starting the machine. (2) Check whether the power supply voltage is in compliance, g... read more
Explanation of the solution to the problem of injection molding machine clamping part 1. No clamping Approach: Check the travel switch in front of the safety door and repair it. Check the 24V5A power supply in the electric box, replace the fuse and the power box. Check whether the spool is stuck and... read more
After the temperature of the injection molding machine is set, it will always exceed the set temperature after a period of time. 1) After reaching the set temperature, the relay is disconnected, and the temperature is still high: The control of this circuit is normal. The reason is that the friction... read more
1. "Position injection" method because the pressure and speed of the latter stage are cancelled, and two influencing factors are missing. Therefore, only the pressure and speed of the previous stage need to be adjusted and the starting point is moved back and forth appropriately, and the adjustment ... read more
People use high-speed injection molding machines to shorten the injection cycle and improve production efficiency. However, in the production process of injection molded products, the slip of the screw of the injection molding machine is a big problem. Especially for hygroscopic materials (such as n... read more
Two-color injection molding machine Alternate operation, can automatically insert and pick up parts, reduce labor costs, stabilize production efficiency, stabilize quality, and stabilize production capacity Introduction Clamping force: 35~500Tons Injection volume: 2.5~50 OZ(74g~1400g) Injection spee... read more