High-end customize specialist of plastic injection molding solutions!

HIGHSUN MACHINERY

Hotline

HXS/h176 HXS unmixed two color injection molding machines

BASIC INFO
 HXS unmixed two color injection molding machines 

- with the main and vice two injection parts

- controlled by a professional computer program two screws simultaneously or alternately

- can produce sandwich products

- This machine can be widely used in PP, PE, PS and other raw materials, two-color molding

Injection part

 

Two sets of parallel placement and independent control of the injection part, a variety of injection action combinations for customers to choose.

High Torque Oil Motor Driving Screw Preforming Device

High quality alloy nitriding screw and barrel nitriding treatment

The barrel temperature is controlled by the computer PID

Storage back pressure adjustable system

Nozzle on the fine-tuning device

Multi - stage injection, packing, storage pressure, speed, position control screw cold start protection

Injection position electronic scale control

Anti-slip aluminum profile cover



Mold part

 

1. Rotary turntable with high performance, long life, axial movement of the needle roller bearings, and with the limit pin and hydraulic positioning pin common positioning,

Speed control using proportional valve to ensure that the turntable rotation action quickly, smooth operation, accurate positioning;

2. When the turntable is rotated, it does not come into contact with the movable template to reduce the malfunction caused by wear.

Oblique row of five-point double elbow structure, the template by the computer parameter optimization design

Mechanical, hydraulic, electrical triple safety interlock protection

A variety of hydraulic ejector mode

Multi - stage opening and closing mold pressure, speed, position control

Hydraulic motor drive gear adjustment mode

Tie rod special process, reliable strength

White moving centralized lubrication system

Open and close the mold, the top position control

Automatic transfer function



Hydraulic part  

 

Two separate proportional pressure flow control lines are used to drive two sets of injection components and two sets of hydraulic ejector systems.

Excellent oil system design, with the world famous brand of control valves and pumps, so that the control of the entire machine to achieve the best condition

Low noise quantitative pump system

Pressure flow double proportional valve control

Hydraulic oil cooling device

Optimized combination of high - performance imported hydraulic parts

 

The fuel tank is open and easy to clean

Electrical parts

Dedicated press control computer, control and display is relatively independent, good reliability

Process parameter presetting and storage function

Parameter data protection function

The barrel temperature deviation is automatically corrected

Colorful LCD display

Abnormal alarm function

Front and rear door emergency stop button

Real-time monitoring shows the operation of each action

Motor safety protection device

Robot interface

Cutting photoelectric switch

System hardware I / O detection function

Through the computer settings and PID closed-loop way to precisely control the cylinder temperature

Screen saver function to extend the life of the display

Fully enclosed electrical control box, electrical components arranged neatly, do not interfere with each other

 

 




HXS unmixed two color injection molding machines  HXS/h176






MODEL:HXS/h176

TECHNICAL PARAMETER TABLE

AA

AB

AC

BA

BB

BC

INJECTION UNIT

SCREW DIAMETER

mm

40

45

48

32

35

38

SCREW L/D RATIO

L/D

22.5

20

18.8

24

22

20.2

INJECTION CAPACITY IN THEORY

cm3

245

324

353

128

154

181

INJECTION WEIGHT(PS)

g

228

301

328

116

140

164

oz

8.0

10.6

11.5

4.0

4.9

5.7

INJECTION PRESSURE

MPa

224

177

155

262

219

185

INJECTION RATE

g/s

118

150

170

71

85

101

PLASTICIZING CAPACITY

g/s

18

22

25

10

11

13

SCREW SPEED

rpm

220

380

CLAMPING UNIT

CLAMPING FORCE

KN

1760

MOVING MOULD-PLATE STROKE

mm

430

    MAX. MOULD HEIGHT

mm

480

MIN. MOULD HEIGHT

mm

180

SPACE BWTWEEN TIE-BARS (W×H)

mm

460x460

HYDRAULIC EJECTOR FORCE

kn

40

HYDRAULIC EJECTOR STROKE

mm

130

EJECTOR NUMBER

n

5

WHEEL DIAMETER

mm

 

OTHERS

PUMP PRESSURE

MPa

16

MOTOR /DRIVING POWER

KW

15/18.5

HEATING CAPACITY

KW

26.7

MACHINE DIMENSION (L×W×H)

m

5.1x1.73x2.03

MACHINE WEIGHT

t

6

OIL TANK CAPACITY

L

248









Next:

Online Inquiry

Online chat