High-end customize specialist of plastic injection molding solutions!

HIGHSUN MACHINERY

Hotline

HXS400 HXS unmixed two color injection molding machines

BASIC INFO
  HXS unmixed two color injection molding machines 

- with the main and vice two injection parts

- controlled by a professional computer program two screws simultaneously or alternately

- can produce sandwich products

- This machine can be widely used in PP, PE, PS and other raw materials, two-color molding

Injection part

 

Two sets of parallel placement and independent control of the injection part, a variety of injection action combinations for customers to choose.

High Torque Oil Motor Driving Screw Preforming Device

High quality alloy nitriding screw and barrel nitriding treatment

The barrel temperature is controlled by the computer PID

Storage back pressure adjustable system

Nozzle on the fine-tuning device

Multi - stage injection, packing, storage pressure, speed, position control screw cold start protection

Injection position electronic scale control

Anti-slip aluminum profile cover



Mold part

 

1. Rotary turntable with high performance, long life, axial movement of the needle roller bearings, and with the limit pin and hydraulic positioning pin common positioning,

Speed control using proportional valve to ensure that the turntable rotation action quickly, smooth operation, accurate positioning;

2. When the turntable is rotated, it does not come into contact with the movable template to reduce the malfunction caused by wear.

Oblique row of five-point double elbow structure, the template by the computer parameter optimization design

Mechanical, hydraulic, electrical triple safety interlock protection

A variety of hydraulic ejector mode

Multi - stage opening and closing mold pressure, speed, position control

Hydraulic motor drive gear adjustment mode

Tie rod special process, reliable strength

White moving centralized lubrication system

Open and close the mold, the top position control

Automatic transfer function



Hydraulic part  

 

Two separate proportional pressure flow control lines are used to drive two sets of injection components and two sets of hydraulic ejector systems.

Excellent oil system design, with the world famous brand of control valves and pumps, so that the control of the entire machine to achieve the best condition

Low noise quantitative pump system

Pressure flow double proportional valve control

Hydraulic oil cooling device

Optimized combination of high - performance imported hydraulic parts

 

The fuel tank is open and easy to clean

Electrical parts

Dedicated press control computer, control and display is relatively independent, good reliability

Process parameter presetting and storage function

Parameter data protection function

The barrel temperature deviation is automatically corrected

Colorful LCD display

Abnormal alarm function

Front and rear door emergency stop button

Real-time monitoring shows the operation of each action

Motor safety protection device

Robot interface

Cutting photoelectric switch

System hardware I / O detection function

Through the computer settings and PID closed-loop way to precisely control the cylinder temperature

Screen saver function to extend the life of the display

Fully enclosed electrical control box, electrical components arranged neatly, do not interfere with each other




HXS unmixed two color injection molding machines  HXS400


MODEL:HXS400

TECHNICAL PARAMETER TABLE

AA

AB

AC

BA

BB

BC

INJECTION UNIT

SCREW DIAMETER

mm

45

50

55

38

42

45

SCREW L/D RATIO

L/D

22.2

20

18.2

23.1

20.9

19.5

INJECTION CAPACITY IN THEORY

cm3

342

422

510

210

256

294

INJECTION WEIGHT(PS)

g

311

384

465

190

233

268

oz

10.9

13.5

16.4

3.7

8.2

9.4

INJECTION PRESSURE

MPa

216

175

144

210

172

150

INJECTION RATE

g/s

 150

185

225

97

118

135

PLASTICIZING CAPACITY

g/s

21

26

33

17

21

23

SCREW SPEED

rpm

190

240

CLAMPING UNIT

CLAMPING FORCE

KN

4000

MOVING MOULD-PLATE STROKE

mm

620

    MAX. MOULD HEIGHT

mm

650

MIN. MOULD HEIGHT

mm

250

SPACE BWTWEEN TIE-BARS (W×H)

mm

1020X620

HYDRAULIC EJECTOR FORCE

kn

53

HYDRAULIC EJECTOR STROKE

mm

200

EJECTOR NUMBER

n

1X2

WHEEL DIAMETER

mm

1010

OTHERS

PUMP PRESSURE

MPa

16

MOTOR /DRIVING POWER

KW

22/23

15/23

HEATING CAPACITY

KW

13.35

10.95

MACHINE DIMENSION (L×W×H)

m

6.92X1.95X2.15

MACHINE WEIGHT

t

17

OIL TANK CAPACITY

L

820





Previous :
Next:

Online Inquiry

Online chat